In recent days I have had the opportunity to continue their work. With lists
wooden square 2x2 cm and 9 cm Length of tray I made the headband.
wooden square 2x2 cm and 9 cm Length of tray I made the headband.
In masonite strips of 10 cm in height and at the cable pullers, I played the holes with hole saw 38 mm in diameter.
The edge of the holes was then sanded and reinforced with touches of very diluted white glue. With the same glue (and only with the help of clamps and weights), I then set the bands at the front of the module.
the corners of the module lists masonite were connected together using wooden rods 3 mm in diameter, glued and grouted (always with only glue) as shown in photo.
The choice of the knobs of drawers fell on this model that has a central hole of 4 mm.
To apply all the knobs at the same distance from the perimeter of the module list and perfectly perpendicular to it was enough to insert between the knob and the list of constant wall thickness.
The difference between the diameter of the cable puller (2 mm) and the knob hole (4 mm) allows easy centering of the handle during installation. The use of superglue gel helps in the operation of fine tuning.
staining band will run only in the finished plastic.
0 comments:
Post a Comment